|
Lock mortiser
 |
Specially designed for quick, precise mortising on doors or other elements, either at the work site or in the workshop. Its special fixing system allows the mortising of doors that have already been hung, without damaging the surface. Its quick measurement adjustment permits multiple mortises to be made in record time. Also able to work horizontally. For mortising grooved doors or those with overlap, there is an adjustment system to centre the machine. Optional bits are lowcost and easily inter-changeable, as they use the same tool-holding shaft. Equipped from factory with hard metal lock mortiser bit Ø 15 mm, locking bar to make mortises on several doors at the same height, rubber protectors for delicate jobs, service keys and dust collector connection.
Its special fixing system allows the mortising of doors that have already been hung, without damaging the surface.
The machine is also able to work horizontally, which can be especially useful if deciding to make a series of mortises, with the doors unhung.
It also permits to mortise grooved doors or those with overlap, thanks to the possibility of adjusting the centre of the machine over the section of the door where the mortise is required
Specifications:
Double isolation
Input power: 1,100 W
Max. bit Ø: 30 mm
Max. mortising depth: 0-125 mm
Max. mortising depth: 177mm + bit Ø
Max. clamp vise opening : 190 mm
No-load speed: 23,000/min
Wooden box for carriage
Optional low-cost bits:
Sharing the same tool-holding shaft.
Easily interchangeable.
Set of 5 hard metal bits
Diameters: 18, 21, 23, 25, 30 mm. (ref. 1640138)
Tool-holding shaft included with the FC16I
(*) Bit included with standard equipement.
1640127 Bit Ø 15 mm. HM*
1640128 Bit Ø 18 mm. HM
1640129 Bit Ø 21 mm. HM
1640130 Bit Ø 23 mm. HM
1640131 Bit Ø 25 mm. HM
1640132 Bit Ø 30 mm. HM
|
|
 |
 |
